Click or scroll to zoom
Tap or pinch to zoom
In-Line Flowmeter for Compressed Air and Nitrogen (Thread size 3/8 NPT) - 5100-03-20
by CDI Meters
$984.50
Order now, stock will leave our store in the next 2-4 weeks
Email The Electric Burst Team For More Availability Information
SKU 5100-03-20
The CDI 5100 extends the capability of the CDI 5000 series to the low flow rates found in many point-of-use applications. It does this by concentrating the flow into a small area that is chosen to optimize the tradeoff between pressure drop and low-flow sensitivity. Used in its intended flow range and at a pressure of 100 psig, the 5100 will create a pressure drop no greater than one psi.
The meter measures flow by maintaining one probe warmer than the other. It determines the mass flow rate from the amount of heat required. The flow rate, in scfm or equivalent units, is shown on a large, four-digit display; a 4-20 mA output and a pulse output permit remote display, totalizing and data collection.
Features:
- Accurate measurement of small point-of-use flows
- Minimal pressure drop
- Weather resistant and surge protected
- Milliamp output
- Pulse output convertible to threshold output
- U ser-configurable scaling, filtering and units of measure
- Optional wired or wireless output for networking
Specifications:
- Accuracy: 2 percent of reading plus 0.5 percent of range for flows from 10 percent to 100 percent of indicated range at air temperature of 68 degrees Fahrenheit and a pressure of 100 psig.
- Fluids: Compressed air and Nitrogen
- Range: 20 scfm
- Operating pressure: 200 psig maximum on Sch. 40 steel and on Type L Copper;
- Input power: 250 mA at 24 Vdc
- Output resistance: 600 Ohms max.
- Materials exposed to measured fluid: Anodized aluminum, aluminum, gold, stainless steel, thermal epoxy and Buna-N (seal)
- Display: Four-digit LED display
- Response time: One second to 63 percent of change in value at flows above 30 percent of range
The meter measures flow by maintaining one probe warmer than the other. It determines the mass flow rate from the amount of heat required. The flow rate, in scfm or equivalent units, is shown on a large, four-digit display; a 4-20 mA output and a pulse output permit remote display, totalizing and data collection.
Features:
- Accurate measurement of small point-of-use flows
- Minimal pressure drop
- Weather resistant and surge protected
- Milliamp output
- Pulse output convertible to threshold output
- U ser-configurable scaling, filtering and units of measure
- Optional wired or wireless output for networking
Specifications:
- Accuracy: 2 percent of reading plus 0.5 percent of range for flows from 10 percent to 100 percent of indicated range at air temperature of 68 degrees Fahrenheit and a pressure of 100 psig.
- Fluids: Compressed air and Nitrogen
- Range: 20 scfm
- Operating pressure: 200 psig maximum on Sch. 40 steel and on Type L Copper;
- Input power: 250 mA at 24 Vdc
- Output resistance: 600 Ohms max.
- Materials exposed to measured fluid: Anodized aluminum, aluminum, gold, stainless steel, thermal epoxy and Buna-N (seal)
- Display: Four-digit LED display
- Response time: One second to 63 percent of change in value at flows above 30 percent of range
